FEP Resin Wire Application
FEP Resin Wire Application DS601
1:Appearance: Translucent Particles
2:Melting Index:2.1-4.0 g/10min
3:Tensile Strength 27Mpa Min
5:Package: 25kg per Bag
Introduction of FEP Resin Wire Application DS601
The excellent properties of FEP determine that there is a great difference between the processing technology of FEP and that of common plastics in the extrusion process. The strict requirements of extrusion equipment and process make the production process difficult to control and easy to produce too many process quality problems. Non-standard process control results in defects in product quality. There are also many factors affecting the process, such as wire and cable coating.
In the production and manufacture of FEP wire, the standard of production process and operation should be strictly controlled, and the processing temperature should not exceed the decomposition temperature. In the production processing zone, exhaust gas suction and purification devices should be set up, and the air at the production site should be as fresh as possible to avoid injury to the workers by harmful substances.
Quality Specification of FEP Resin Wire Application DS601
Translucent particles,without impurities such as metal debris and sand,containing visible black particles percentage point less than 2%
Elongation at break ≥
Heat stress Cracking Resistance
Main Applications of FEP Resin Wire Application DS601
FEP Resin DS601:Hear stress cracking resistant plastics,mainly for wire insulation layer,thin-walled tube.