Tel: +8613864314350


Home > Knowledge > Content
The superiority of PTFE Capillary and its Raw material
- Aug 23, 2018 -

Polytetrafluoroethylene capillary tubes as fluoroplastic tubes are relatively special, so it is extruded from high-quality materials, its inner diameter is very small, or even less than 1 mm. Because PTFE capillary adopts special processing technology, it can make steel pipe and plastic pipe combine closely and improve its bearing capacity. PTFE capillary is also very strong to withstand temperature, in the range of minus 60 degrees Celsius to 260 degrees Celsius, can be used normally. In addition, PTFE capillaries also have reliable and excellent corrosion resistance, which can not be replaced by other pipelines in the transportation of highly corrosive gases or liquids at high temperatures. Then letundefineds talk about PTFE, the raw material of PTFE capillary, mainly because it has excellent chemical stability, is able to withstand all the strong acids, strong bases, strong oxidants, and doesnundefinedt work with all kinds of organic solvents. In order to make the pipe so excellent. In addition, it has a very low friction coefficient, in addition to making PTFE capillaries, it is also a good antiwear, self-lubricating material, which is also very suitable for making bearings, showing low starting resistance. The advantage of smooth operation. In addition, PTFE has no polarity, heat resistance and water absorption, so it is an excellent electrical insulating material. This is where materials are widely used in machinery, chemicals, aviation, electronics, defense industry, cutting-edge technology, health care, electrical insulation and so on.

100% virgin PTFE Powder.jpg