Tel: +8613864314350


Home > News > Content
FEP Resin Manufactory In China
- Jun 14, 2018 -

     Shandong Hengyi New Material Technology Co.,ltd. is a company in Shandong which specializes in selling Teflon FEP particles from many manufacturers at home and abroad, including FEP particles for injection molding, FEP particles  for extrusion, FEP particles  for molding, and concentration of polyperfluoroethylene in FEP concentration. If you want to know the FEP particle manufacturer and the price of the Teflon FEP particles, please consult us, and we will give you a detailed introduction to the manufacturer of FEP particles and the latest FEP price.

     We started our this fluoropolymer since 2011. The company headquarters is located in the largest chemical production base in the country - Zibo, Shandong province. Shandong Hengyi New Material Technology Co.,ltd. has a good reputation in industrial raw material, and has established a long-term stable agent with a number of FEP particle manufacturers at home and abroad. The cooperative relationship, a perfect pre sale, after sale service system, a free technical support for the Teflon FEP particles and the allocation of special materials,including polyfluoroethylene propylene FEP (F46), polyvinylidene fluoride PVDF (F26), polytetrafluoroethylene PTFE (F4), polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide, polyamide Aluminum chloride, ion exchange membrane, polyether ether ketone PEEK, seven fluoropropane, eight fluoropropane, aramid fiber powder, ethylene tetrafluoroethylene copolymer ETFE (F40), fusing polytetrafluoroethylene PFA and so on; Teflon special color mother color powder; fluororubber FKM raw material: two yuan fluorine rubber, three yuan fluororubber, fluororubber compound rubber and so on.

     Shandong Hengyi New Material Technology Co.,ltd., adhering to the management concept of "customer first, honesty first, pragmatic innovation and excellence", is based on perfect service network, enthusiastic service attitude, strict service standard, satisfactory service effect as standard. "Customer first, service satisfaction", provide a full service for users from pre-sale to after-sales service. In order to meet the needs of the users, the company is based on the Pearl River Delta area, actively develops the market, the business radiates the whole country, and has established a long-term friendly cooperative relationship with large plastic manufacturers at home and abroad. At the same time, according to the requirements of customers, we can customize the production of various special specifications of the Teflon products. The purpose of Shandong Hengyi New Material Technology Co.,ltd. The company meets the needs of customers from all over the world with the concept of "pursuing perfection and customer first".

FEP Resin  Insulation Application DS618.jpgFEP Pellet  Cable Insulation Application DS602.jpgFEP Granule Heating Cable.jpg

    Shandong Hengyi New Material Technology Co.,ltd. is to meet the customer multifaceted demand, and sells multiple manufacturers of high performance Teflon FEP particles in many countries. The Teflon FEP particles, sold by Shandong Hengyi New Material Technology Co.,ltd., are a kind of high temperature resistant, corrosion resistant, shock resistant, radiation resistant engineering plastics, insulating materials, Antistatic material. We sold the Teflon FEP particle products all meet the SGS and ROHS environmental requirements, customers need to be attached to the Teflon FEP particle material origin report and related instructions.

The Teflon FEP particles, which are sold  have similar characteristics to polytetrafluoroethylene and good processing technology of thermoplastic plastics, thus making it an important substitute for polytetrafluoroethylene. It can work at 205 degrees at -85 degrees for a long time, and work under -200 degree to 300 degrees for a short time; high impact strength and creep resistance. Sex, low temperature flexibility is better than fluxing polytetrafluoroethylene resin PFA.

    The thermal decomposition temperature of the Teflon FEP particle resin sold by us is higher than the melting point temperature. The significant thermal decomposition occurs at more than 400 degrees C. The decomposition products are mainly tetrafluoroethylene and six fluorine propylene. As F46 macromolecules usually have the same end groups at above melting temperature, they will also be decomposed at the temperature of 300. The above process must also be noted that proper ventilation is required.

    The crystalline melting temperature of the Teflon FEP particles sold by Dongguan poly fluorine New Material Co., Ltd. is 520F, and the density is 2.15g/CC (g / cubic centimeter) after sintering. The electrical insulation property of the FEP floating liquid is almost close to that of polytetrafluoroethylene. Its dielectric constant is from lower temperature to higher temperature, from 60Hz to 1020Hz ultra high frequency range almost. There is no change, and the number is very low, only about 2. The dielectric loss is slightly changed with the change of frequency, but the volume resistivity of the.FEP float can be said to be very high with the change of temperature. It is generally greater than 1115 Omega m, and there is no larger numerical change with the temperature and no heat. The breakdown voltage of the resistance value.FEP floats increases with the increase of thickness. When the thickness is greater than 1.1mm, the breakdown voltage is above 40kV/mm, but it will not change with the temperature. The heat resistance of the floating liquid is second only to the PTFE polytetrafluoroethylene plastic, and the temperature range is at the temperature range of - 12 1 - 22. Even at the extreme value of low temperature - 190 C and high temperature 240 C, the performance will not have large malignant changes. Of course, the thermal decomposition temperature of.FEP floating liquid can only be used in a short time higher than the melting point temperature, and the apparent thermal degradation effect and decomposition of the product at more than 410 degrees centigrade can be obtained. The main quality is TFE and six fluorine propylene. Because the FEP floating macromolecules are usually with the same end group at the temperature above the melting point, the thermal degradation will occur. Therefore, the appropriate ventilation and anti poison gas must be paid attention to in the process of processing over 320 degrees C.

FEP resin.jpgFEP Granule.jpgFEP Pellet.jpg

    The Teflon FEP particles sold by Shandong Hengyi New Material Technology Co.,ltd. are fairly stable at the temperature of the melting point, but the mechanical strength is lost at the high temperature of 200. The decrease of the melt viscosity and the thermal decomposition of the copolymer can be analyzed with the increase of the melting index. The iron flufon FEP particles are still not completely brittle at -250 C. It also has a very small elongation and a certain flexibility. It is even better than Teflon. It is inferior to all other kinds of plastics.

    Shandong Hengyi New Material Technology Co.,ltd. sells Teflon FEP particles, FEP emulsion, FEP ultrafine powder, FEP particles, high temperature FEP, transparent FEP particles and other products: red, green, yellow, blue, gray, black and so on, melting index: 1 ~ 28. of Dongguan municipal polyfluorine New Material Co., Ltd. is directly connected from the Teflon FEP particle manufacturer and belongs to the first class agent FEP particle processing and molding technology is more complex, the immature molding technology will reduce the product performance, or can not reach the product requirements after the molding, so the company has several professionals engaged in chemical industry technology to solve the technical problems in processing molding for customers!