Polyacrylamide,that is PAM, widely used in water treatment industry. Even it is the leader polymer in this field.
Product Introduction: Polyacrylamide is a water-soluble polymer. Because its molecular chain contains a certain number of polar groups, it can bridge the particles by adsorbing the suspended solid particles in water or make the particles agglomerate to form a large flocculant through charge neutralization. Therefore, it can accelerate the settling of particles in suspensions.
1, Cationic, anionic, Nonionic, amphoteric ion, complete specifications, can meet the needs of all aspects.
2, Water soluble, in cold water can also be completely dissolved.
3, Add a small amount of this series of products, you can receive a great flocculation effect. Generally, it only needs to add 0. 01-10 ppm (0. 01-10 g / m 3) to fully play its role.
4, This series of products and polyaluminum chloride, can show greater effect.
Specification of Cationic Polyacrylamide
Specification of Anionic Polyacrylamide
Specification of Nonionic Type Polyacrylamide
white fine-sand shaped powder or colorless transparent colloid
Function: the flocculation effect of this series of products is very strong, because it has: 1, clarification and purification action 2, sedimentation promotion action; 3, filtration promotion effect; 4, thickening (thickening) action and other effects. In the aspects of wastewater, waste liquid treatment, sludge concentration and dewatering, drilling mud additive, mineral dressing, coal washing, papermaking and so on, it can fully meet the requirements of various fields.
Use method: 1, when used, mix 0.1-0.3% concentration of aqueous solution, to use neutral non-salt water as appropriate. When dissolved, evenly sprinkle this series of products into the stirred water, stirring speed control at 100-300 rpm, appropriate heating (< 60 ℃), May accelerate dissolution by adjusting the PH value of the treated liquid to the full effect of the product series (select the best PH value and the dosage of the series product by test, and accelerate the mixing with the treated solution when added to the solution of the series product, After the flocculation appears, the stirring speed is slowed down, so as to facilitate the flocculation growth and accelerate the sedimentation.
Packaging, storage and attention: 25 kg plastic lined woven bags or paper plastic bags packaging, but also according to user requirements. Polyacrylamide itself is not toxic and is harmful only when inhaled more than 05:00 due to the absorption of nutrients by the gastrointestinal mucosa. The residual acrylamide monomer in polyacrylamide is toxic, food application should be strictly controlled. During storage and transportation, pay attention to heat-proof, moisture-proof, prevent package damage, dry powder products long-term moisture absorption caking. The number of stacking layers shall not exceed 20. The effective storage period is 2 years.