PFA Extrusion Resin
PFA is a copolymer of tetrafluoroethylene and perfluoroethylene ether. It has excellent chemical stability, electrical insulation, aging resistance and low friction coefficient. Injection molding and other general thermoplastic molding processing technology for processing.
PFA Extrusion Resin DS700
The melting point of the PFA Resin is about 580F, and the density is 2.13-2.16g / cc.PFA is similar to PTFE and FEP, but at 302T or above, the mechanical properties are slightly better than FEPs and can be used at temperatures up to 500F. Its chemical resistance is similar to that of PTEF. PFA is in the form of granular products for moulding and extruding, powder products for rotary moulding and coatings, and semi-finished products for films, plates, rods and pipes.
Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 6%
Elongation at Break
Packaging, transport, storage:
1. Packaging in two layers of plastic bags, and then in the outer packaging plastic bags, each bag of 25 kg net weight, each bag with certification.
2. Store in a clean, dry, cool, light-shielded environment to prevent impurities from mixing.
3. Non-toxic, non-combustible, non-explosive, non-corrosive, transported according to non-dangerous goods.