Tel: +8613864314350

E-mail: andy@chinafluoropolymer.com

PFA Resin Extrusion Processing

PFA Resin Extrusion Processing

PFA Resin Extrusion processing DS700 PFA is a copolymer of tetrafluoroethylene and perfluoroethylene ether. It has excellent chemical stability, electrical insulation, aging resistance and low friction coefficient. Injection molding and other general thermoplastic molding processing technology...

Send InquiryChat Now
Product Details

Product Description

PFA is a copolymer of tetrafluoroethylene and perfluoroethylene ether. It has excellent chemical stability, electrical insulation, aging resistance and low friction coefficient. Injection molding and other general thermoplastic molding processing technology for processing.


Item

Unit

DS702

DS701

DS700

DS708






A

B

C

Appearance


Translucent particle,with impurities such    as metal debris and sand,containing visible black particles percentage point    less than 6%

MFR

G/10min

0.8-2.5

2.6-6

6.1-12

12.1-16

16.1-24

>24

Relative Gravity(25C)


G/cm3

2.12-2.17

Melting Point

°C

300-310

Processing Temperature

°C

260

Tensile Strength

Mpa

32

30

28

26

24

24

Elongation at Break

%

300

300

350

350

350

350

Water Absorption

%

0.01


Product use:

DS702: mainly used in pipes, pumps, valves, tank lining, diaphragm, joints, some bearings, etc.

DS701: mainly used for pipe, wire insulation layer, film and various parts;

DS700: for extrusion processing of general plastics, mainly used in cable insulation, multi-core cable sheath, etc.

DS708: mainly used in aviation, aerospace, chemical industry, faster cable extrusion, for most of the use without high stress cracking is more economical.

Note: Processing above 425 ℃ should be avoided so as to prevent the decomposition of PFA to promote the corrosion of the equipment, and the residence time at high temperature should not be too long.


Hot Tags: PFA resin extrusion processing, China, suppliers, manufacturers, factory, buy, price
Related Products
Inquiry