PTFE for Non Stick Pan
PTFE Non Stick Coating / Three-Layer Spray / Water Base Non-Stick Coatings TFE anti-stick and non stick coating 1. Abundant experience and factory directly 2. Customized 3. Quality and service assurance 4. Process materials supplied by clients Coating material: Peek, PTFE, PFA, FEP, ETFE, ECTFE,...
PTFE Non Stick Coating / Three-Layer Spray / Water Base Non-Stick Coatings
TFE anti-stick and non stick coating
1. Abundant experience and factory directly
3. Quality and service assurance
4. Process materials supplied by clients
Peek, PTFE, PFA, FEP, ETFE, ECTFE, etc
0.01mm-1mm based on clients' requirement
Ptfe Coating Advantages:
1. Abrasion resistance
2. Self lubrication
3. Corrosion resistance
4. No adhesion
5. Scratch resistance
6. High temperature resistance
7. Electrical insulation
9. Ageing resistance
Note: Different coating material will have different advantages. Also need to consider your basic materials.
So pls kindly send your need detailed function or finished coating sample, then we will give you best suggestions.
Polytetrafluoroethylene is a polymer of tetrafluoroethylene. The abbreviation is PTFE.
Mechanical properties: its friction coefficient is only 1 / 5 of polyethylene, which is an important feature of perfluorocarbon surface. Due to the very low intermolecular force of fluorine-carbon chain, PTFE is non-viscous.
Electrical properties: the dielectric constant and dielectric loss of PTFE in a wide frequency range are very low, and the breakdown voltage, volume resistivity and arc resistance are higher.
Radiation resistance: the radiation resistance of PTFE was poor, which was degraded by high energy radiation, and the electrical and mechanical properties of polytetrafluoroethylene decreased obviously.
Polytetrafluoroethylene (PTFE) formed by free radical polymerization of tetrafluoroethylene (PTFE). Industrial polymerization is agitated in the presence of a large amount of water to disperse the reaction heat and to control the temperature. The polymerization is usually carried out at 4080 ℃ ~ 326kg / cm ~ 2 pressure with inorganic persulfate, organic peroxide as initiator or redox initiator. The heat release of tetrafluoroethylene per mole was 171.38 kJ. Dispersion polymerization must be supplemented with perfluorinated surfactants, such as perfluorooctanoic acid or its salts.